Broadband seismometer CME-6011-BH150

3-component low-noise broadband borehole seismometer СМЕ-6011-ВН150 is designed to be installed in dry or flooded boreholes for a long term.

The СМЕ-6011-ВН150 model has an analog output and requires connecting to an analog-to-digital data logger (not included into a standard delivery set).

The instrument does not require any settings or adjustment for operations, does not require mass centering or levelling to the vertical. It operates perfectly at angles of up to 15°.

The IP 68 means total protection against dust and water. The instrument is capable to operate in flooded boreholes at depths of up to 250 meters.

Characteristics Delivery and warranty

Frequency range 0.016 Hz (60 sec) - 50 Hz
Sensitivity 2000 V/(m/sec)
Clip level ±7.5 mm/sec
Self noise at 1 Hz 2.5 nm/sec
Dynamic range 127 dB
Nonlinearity 0.2 %
Sensitivity axes Vertical, North, East
Supply voltage 12 V Nominal (10.5 - 16 V permissible)
Power consumption 33 mA
Temperature range -40...+55°C
Maximum installation tilt ±15º
Dimensions 105 mm / 454 mm (505 mm including lifting ring)
Weight 7.5 kg
Case material Stainless steel, waterproof, depth down to 250 m
Max. underwater depth 250 m
Output impedance 1000 Ohms
Cross-axes sensitivity -60 dB
Cold-start time 10 - 30 min
Leveling, mass locking none required
Case connectors Russian RS-10 type 10-pin connector with additional hermetic sealing
Delivery set Lifting ring, 3 feet, pin
Maximum output swing ±15 V, differential output